青青久久av北条麻妃黑人,国产伦理精品,国产精品爽爽爽爽爽爽在线观看,精品国产乱码久久久久久虫虫漫画

PA6 B 30 S 000000德國朗盛Durethan注塑成型聚酰胺6尼龍塑料（18024445500）

Durethan B 30 S 000000　　




Data sheet
PA 6, non-reinforced, injection molding

ISO

ISO Shortname: ISO 1874-PA 6, GR, 14-030

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
Molding shrinkage, parallel 150x105x3; 260 °C / MT 80 °C; 500 bar % acc. ISO 2577 1.02　
Molding shrinkage, transverse 150x105x3; 260 °C / MT 80 °C; 500 bar % acc. ISO 2577 1.16　
Post- shrinkage, parallel 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.32　
Post- shrinkage, transverse 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.4　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 3200 1000
C Yield stress 50 mm/min MPa ISO 527-1,-2 80 40
C Yield strain 50 mm/min % ISO 527-1,-2 4.0 20
C Nominal strain at break 50 mm/min % ISO 527-1,-2 20 > 50
C Tensile creep modulus 1 h MPa ISO 899-1　800
C Tensile creep modulus 1000 h MPa ISO 899-1　600
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU N N
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU N N
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA < 10 20
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA <10 <10