青青久久av北条麻妃黑人,国产伦理精品,国产精品爽爽爽爽爽爽在线观看,精品国产乱码久久久久久虫虫漫画

PA6 B 31 SK 000000德國朗盛Durethan吸塵器外殼玩具用尼龍6塑料（18024445500）

PA 6, non-reinforced, injection molding

ISO/ ASTM

ISO Shortname: ISO 1874-PA 6, GR, 14-030,

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Melt volume-flow rate 260 °C; 5 kg cm³/(10 min) ISO 1133-1 110　
Molding shrinkage, parallel 150x105x3; 280 °C / MT 80 °C; 400 bar % acc. ISO 2577 0.9　
Molding shrinkage, transverse 150x105x3; 280 °C / MT 80 °C; 400 bar % acc. ISO 2577 1.1　
Post- shrinkage, parallel 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.15　
Post- shrinkage, transverse 150x105x3; 120 °C; 4 h % acc. ISO 2577 0.15　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 3500 1100
C Yield stress 50 mm/min MPa ISO 527-1,-2 85 50
C Yield strain 50 mm/min % ISO 527-1,-2 4.0 20
C Nominal strain at break 50 mm/min % ISO 527-1,-2 10 > 50
C Tensile creep modulus 1 h MPa ISO 899-1　900
C Tensile creep modulus 1000 h MPa ISO 899-1　700
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU N N
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU N N
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA < 10 25
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA < 10 < 10