無錫4S店地坪價格是多少 400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
Non-metallic wear-resistant floor is a certain selection of aggregate particle size gradation, high-strength cement, special additives, pigments and polymers, wear-resistant surface layer of dense color layer can be formed on the basis of concrete. Good impact resistance. Can be widely used in shopping malls, supermarkets, sidewalks, parking lots, workshops, machine maintenance workshops, warehouses and other needs special enhanced surface wear resistance properties, both indoor and outdoor use, even in a wet state the long-term it will not affect it performance. According to the requirements of floor wear layer (1.5-3.5mm), the recommended dosage is 5-7kg. The main technical indicators quartz sand wear-resistant floor system: 28 days flexural strength of 12MPa 28 day compressive strength of 85MPa surface hardness, mm (diameter of the indentation) 2.8 abrasion resistance ratio.
Metal type
Metal type wear-resistant floor is a certain selection of aggregate particle size gradation, high-strength cement, special additives, pigments and polymers, dial sprinkle a dry method, spread evenly in the initial setting stage of the concrete surface, Construction of a professional construction tools, you can layer extremely dense, high strength wear-resistant surface layer of color is formed on the basis of concrete. Wear hardener total of four colors (cement color, gray, red, green), the advantage is the combination of good performance and the foundation concrete, dense surface, high abrasion resistance, high impact resistance. Can be widely used in need of special enhanced surface abrasion resistance, impact resistance of the concrete surface, such as the production and processing workshop, machine repair shop, warehouses and other places, the drawback is not available for long-term wet conditions on the ground, regular contact with the acid, crystalline salt and other surface chemical solvents. The floor wear layer (1.5-3.5mm) requirements.
Alloy aggregate
Alloy aggregate wear-resistant flooring material mineral aggregate alloys (tin alloy) by a certain wear-resistant material particle size distribution of mineral aggregate alloys, special cement, and other materials and additives badly composed, a bag can be used, the Spread it in the upcoming initial setting stage of the concrete surface, by means of special processing, so that it forms a whole with the concrete floor, and having high color density and high name can wear-resistant surface. Features: reinforced concrete ground abrasion resistance, impact strength of character. Greatly increasing the density of concrete, it rarely dusting, increase defense oily ground, forming a high-density, easy to clean, anti-fathom ground construction together with the concrete floor. Anti-stress, wear resistance, and can not afford to dust, enhanced ground anti-oil, anti-infiltration, they and clean.
Construction steps
Check the original cement mortar floor flatness and adhesion, after reaching the technical requirements, the wear-resistant material with a blender add water and stir ground-paving screed evenly; for machine grinding step when the initial setting to be wear-resistant materials, resistant to After grinding material to polish is completely dry with a trowel, received light. Completion of construction carried sprinkler maintenance, after completion of the maintenance period dedicated machine grinding and polishing process, and with a special wax and waxing the floor.非金屬型耐磨地坪是由一定粒徑級配的精選骨料、高強水泥、特殊外加劑、顏料及聚合物組成，即可在基礎混凝土上形成一層致密的彩色耐磨面層。抗沖擊能力好。可廣泛應用于購物中心、大型超市、人行道、停車場、生產車間、機器維修車間、倉庫等需要特別增強表面耐磨性的場所，室內外均可使用，即使長期處于潮濕狀態也不會影響它的性能。根據地面的耐磨層（1.5—3.5mm）的要求，推薦用量為5—7kg。石英砂型耐磨地坪系統的主要技術指標：28天抗折強度 12MPa 28天抗壓強度 85MPa 表面硬度，mm(壓痕直徑) 2.8 耐磨度比.
金屬型
金屬型耐磨地坪是由一定粒徑級配的精選骨料、高強水泥、特殊外加劑、顏料及聚合物組成，采用干式撥撒方法，均勻地撒布在初凝階段的混凝土表面，用專業施工工具施工，即可在基礎混凝土上形成一層**密、高強度的彩色耐磨面層。耐磨硬化劑共有4種顏色（水泥本色、灰色、紅色、綠色），其優點是與基礎混凝土結合性能好，表面致密，耐磨性高，抗沖擊能力強。可廣泛應用于需要特別增強表面耐磨性、抗沖擊性的混凝土表面，如生產加工車間、機器維修車間、倉庫等場所，其缺點是不適用于長期潮濕環境中的地面，經常接觸酸性、結晶鹽及其它化學溶劑的地面。根據地面耐磨層（1.5—3.5mm）的要求.
合金骨料
合金骨料耐磨地坪材料礦物合金骨料（錫鈦合金）耐磨材料由一定顆粒級配的礦物合金骨料，特種水泥，其它慘和料和外加劑組成，開袋即可使用，將其均勻地撒布在即將初凝階段的混凝土表面，經專門手段加工，從而使其與混凝土地面形成一個整體，且具高致密性和顏色的高姓能耐磨地面。 特性： 增強混凝土地面的耐磨性，耐沖擊性格強度。極大提高了混凝土的密度，使其絕少起塵，增加了地面的防油性，形成一個高密度，易清潔，抗參透的地面與混凝土地面一起施工。抗重壓、耐磨性強、不起塵、增強地面防油性，抗滲透，便與清潔衛生。
施工步驟
檢查原水泥砂漿地坪的平整度和附著力，達到技術要求后，將耐磨材料用攪拌器加水攪拌均勻后進行地面攤鋪刮平；待耐磨材料初凝時進行機器分步打磨，耐磨材料完全干燥以后用抹光機進行打磨，收光。施工完畢進行灑水養護，養護期完成以后使用專用的機器進行研磨及拋光處理，并用專用地坪蠟進行打蠟處理。
資訊來源：<聯系電話:400-0709-910>
|
您當前的位置: 首頁 > 行業資訊
