1、安全:供電滑觸線外殼系由高絕緣性能的工程塑料制成。外殼防護等級可根據需要達以IP13、IP55級,能防護雨、雪和冰凍襲擊以及吊物觸及。產品經受多種環境條件考驗。絕緣性能良好,對檢修人員觸及輸電導管外部無任何傷害。
1, security: power supply sliding contact wire shell is made of high insulation performance engineering plastics. Shell protection grade according to the need of using IP13, IP55, rain, snow and frost protection attacks and hanging touch. The product to a variety of environmental conditions test. Good insulation properties, the maintenance personnel to reach transmission outside the vessel without any harm.
2、可靠:輸電導軌導電懷能極好,散熱較快,并用電流密度高,阻抗值低,線路損失小,電刷由具有高導電性能,高耐磨性能的金屬石墨材料制成。受電器移動靈活,定向性能好,**控制了接觸電弧和串弧現象。
2, reliable transmission guide: conductive with excellent, fast heat dissipation, and high current density, low impedance, line loss is small, brush with high conductivity, made of metal graphite material with high wear resistance. The appliance is mobile and flexible, the directional property is good, the contact arc and the series arc phenomena effectively.
3、經濟:供電滑觸線裝置結構簡單,采用電流密度高,電阻率低,電壓損耗低的銅排作為導電主體?晒電6%左右,實現以塑代鋼,以塑代銅,設計新穎,無需其他絕緣結構,無需補償線,安裝于起重機控制室同側,節省安裝材料和經費,其綜合費用與鋼質祼滑線大致相同。
3, economic power: sliding contact line device has the advantages of simple structure, the high current density, low resistivity, low voltage loss of copper as a conductive body. Can save electricity by 6%, to plastic steel to plastic, copper, novel design, no other insulation structure, without compensation wire, installed in the crane control room with the side, save installation materials and funds, and the comprehensive cost of steel exposed slip line roughly the same.
4、方便:供電滑觸線裝置將多級母線集合于一根導管之中,組半簡便。其固定支架,連接夾、懸吊裝置,均以通用件供應,裝拆、調整、維修亦十分方便。
4, convenient: power sliding contact line device will be set in a multistage bus duct, semi simple group. The fixed bracket, connecting clip, the suspension device, are in general parts supply, install, adjust, repair is also very convenient. |